Feature
Value
Power Requirements
190 - 265 VAC / 50 - 60 Hz Single Phase
size
H 280 x W 125 x D 420 mm
weight
20kHz 1000W & 2000W: 7.5 kg20kHz 2000W & 3000W: 8.0 kg35kHz 600W & 900W: 7.5 kg
Electric box color
RAL3020
Display screen
4 lines x 20 characters LCD screen, backlit
LED Light Bar
20 LED lights to show the peak welding output
LED
4 LED lights to display the status of the power box
keyboard
25 buttons (including ON/OFF)
Micro generator
16-bit / 20MHz
microprocessor
16-bit / 20MHz
Analog/digital signal converter
12-bit
Normal frequency range
20kHz: 19700 - 20150 Hz35kHz: 34700 - 35150 Hz
Power Measurement
Real Time
Frequency measurement
Instant Real Time, the generator can automatically adjust to the normal frequency range
Power loss measurement
Before welding, after welding, turn off this function
Rated output
20kHz: 1000 / 1500 / 2000 / 3000W35kHz: 600 / 900W
Maximum output
10% more than rated output
Internal Amplitude
Adjustable, range 60 - 100%, unit 5%
External Amplitude
Adjustable, range 60 - 100%, unit 5%
Operation Mode
Time, energy, ultrasonic stop, power, travel mode
Time setting range
0.005 - 9.999 s, precision 0.001 s
Energy setting range
0 - 99999.99 Ws, precision 0.01 Ws
Ultrasonic stop mode
Built-in
Power Range
0 - 100%
Stroke setting range
0 - 500.00 mm, error range 0.01mm
Counters and defective product counters
Range 0 - 999999999
Limit value mode
The required energy, time, power, stroke and number of workpieces can be set
Trigger Oscillation Mode
Time trigger setting range: 0.000 - 9.999 s Pressure trigger setting range: 0 - 6.5 bar / sensor 4 - 20 mA
Power output analog signal
Adjustable range 0 - 5 V
Travel deceleration
Adjustable range 0 - 500.00 mm
Press controller
Two-hand start switch & press air pressure
Internal power supply
24VDC/400mA, including voltage regulation and short circuit protection
Signal input
Opto coupler 20 - 28 V DC / max. 7 mA
Signal output
Opto coupler 22 - 26 V DC / 250mA, short circuit proof
Emergency Stop
Screen display message
Error Message
Screen Display / Hardware Output
PLC communication interface
Digital I/O Signal
Database
99 sets of memory
Software Updates
Through the BDE interface
buzzer
A sound will be emitted when the confirmation key is pressed and error messages appear
Connection plug
All D-sub
Pin Password
4-digit lock code to prevent the electric box parameter settings from being modified at will
Main power switch
Back of the electric box
language
English, German, Spanish, French, Italian, etc.
Service/Test Program
Hardware testing of all I/O points
Place the space at the right temperature
Operating temperature -5℃ ~ 45℃ / Storage temperature -20℃ ~ 60℃
Design and manufacturing location
Switzerland
